Please note this item is obsolete, If you are using dali dimming please use the ALTERNATIVE If you are using DSI dimming then please do not order as we aare unable to supply   Digital Dimming Ballast to run 2 X 28/54w T5 tubes - PCA 2x28/54 T5 ECO - 22185100 Product description Processor-controlled ballast with xitec II inside Highest possible energy class CELMA EEI = A1 BAT (1) Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION Nominal lifetime up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h) Multilamp management OEM-specific reserved memory areas 5 years guarantee Interfaces DALI DSI switchDIM (with memory function + selectable dimming rate) corridorFUNCTION (3 preprogrammed profiles) Integrated SMART interface for function with SMART Sensor 5D 19f and corridorFUNCTION plugs Functions Intelligent Temperature Guard (overtemperature protection) Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown) Optimum filament heating in any dimmer setting Disconnection of filament heating from a dimming level of approx. 90 % for maximum energy efficiency (SMART-Heating concept) corridorFUNCTION with ambient light control Automatically triggered emergency lighting value in DC mode, 15 % For emergency lighting systems as per EN 50172 Automatic start after replacement of defective lamps Automatic shutdown if the lamp is faulty 22185100

Read more less

Driver LC 25W 350–1050mA flexC SC EXC excite series With strain-relief Product description Constant current LED driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Adjustable output current between 350 and 1,050 mA via ready2mains Programmer or I-SELECT 2 plugs Max. output power 25 W Up to 86 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Interfaces ready2mains (configuration via mains) Terminal blocks: 45° push terminals Functions Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2) Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Application-oriented operating window for maximum compatibility Best energy savings due to high efficiency Flexible configuration via ready2mains and I-SELECT 2 Typical applications For downlight, spotlight and decorative applications   Data sheet  

Read more less

Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Constant current built-in LED driver, particularly suitable for industrial applications in tough environments with elevated ambient temperatures such as cold warehouses or factories Dimming range 1 to 100 % Output current adjustable between 200 – 850 mA Max. output power 100 W Suitable for mains voltage peaks (burst/surge) up to 4 kV Expanded temperature range of -40 ... +70 °C Nominal lifetime up to 100,000 h (at ta 60 °C) 8 years guarantee 

Read more less

BALLAST TECHNICAL DATA Type OGLI 1000W ST 120 380-415/50 100/50% Ballast for HI lamps OGLI 1000W ST 120 380-415/50 100/50% Ord. No. 20881172 - 11034    Capacitor required : CA15MFD-480-mt Stanadards Directeives Declarations Approvals   EN 60923, EN 61347 RoHS - 2011/65/EU CE - Lamp Type HI 1000W 4,4A Network (line voltage) V / Hz 380; 400; 415 / 50 Current A 4,4 Losses - warm W 41,8 cosfin - 0,57 h % - tw/D tn Thermal protection K 130/ 70 No   L   mm   174 D1 mm 160 Weight Kg 7,75   Packing   Pcs./Carton   3 Packing Pcs./Pallet 108 Impregnation   Vacuum impregnated with polyester resin         Elkosun d.o.o. Tržaška cesta 23 SI -2000 Maribor www.elkosun.com TD 11034 Date: 6. 06. 2016   Page 1  

Read more less

250-1000w Halide Ignitor - 250-1000w HPS Ignitor - 87500084 - ZRM12ES/C

Read more less

1 x 55-35w TCL Combo

Read more less

This item is now obsolete, we will send out the below as a viable alternative   Alternative  Product Details High frequency digital ballast in a compact matchbox form factor for single lamp operation. Automatic start after replacement of defective lamps. Safety shutdown of defective lamps and at end of lamp life. · Suitable for single lamp operation · Runs 28w TC-DD, 26w TC-D and TC-T lamps · 5 year guarantee · IP20 · 50,000hr life Technical Specifications Control Gear Type High Frequency Accessory Type Ballast Wattage 26 W Wattage 26 W Manufacturer Tridonic Dimming? Non-Dimmable No. Of Lamps Single (1x) Depth 21 mm Length 145 mm Type Control Gear Voltage 220-240 Volt Width 22 mm Compatible Lamp Type T5C Compatible Lamp Type PLT (4 Pin) Compatible Lamp Type T5 Compatible Lamp Type T8 Compatible Lamp Type 2D (4 Pin) Control Gear Technology Fluorescent Manufacturers Part Number 22176002 Manufacturers Part Number PC Basic 1x26SL Manufacturers Part Number 22176002

Read more less

basicDIM Wireless User Interface Casambi Ready wireless user interface Casambi Express Black Casambi Express  White  Product description Battery powered, wireless wall switch Forms automatically a wireless communication network with up to 250 nodes (1) Controls all types of basicDIM Wireless devices 4 scenes Dim up / down Colour temperature control 5 years guarantee (1)Depends on production number, see data sheet basicDIM Wireless User Interface.   Data sheet  

Read more less

Product description Fits in most existing MR16 / GU10 halogen luminaires 10 W LED Equivalent to 50 W MR16 halogen with higher lumen output Perfect solution for MR16 / GU10 replacement project Module with integrated electronic, heatsink and optics Compatible with leading and trailing edge phase cut dimmers Dimming range 0.1 to 100 % (depends on dimmer) Eye-catching lens optic with mirrors halogen facettes Long lifetime: L70B50 >50,000 h at tp = 75 °C 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)

Read more less

This item is now obsolete, we will send out the below as a viable alternative   Alternative  Product Details High frequency digital ballast in a compact matchbox form factor for single lamp operation. Automatic start after replacement of defective lamps. Safety shutdown of defective lamps and at end of lamp life. · Suitable for single lamp operation · Runs 28w TC-DD, 26w TC-D and TC-T lamps · 5 year guarantee · IP20 · 50,000hr life Technical Specifications Control Gear Type High Frequency Accessory Type Ballast Wattage 26 W Wattage 26 W Manufacturer Tridonic Dimming? Non-Dimmable No. Of Lamps Single (1x) Depth 21 mm Length 145 mm Type Control Gear Voltage 220-240 Volt Width 22 mm Compatible Lamp Type T5C Compatible Lamp Type PLT (4 Pin) Compatible Lamp Type T5 Compatible Lamp Type T8 Compatible Lamp Type 2D (4 Pin) Control Gear Technology Fluorescent Manufacturers Part Number 22176002 Manufacturers Part Number PC Basic 1x26SL Manufacturers Part Number 22176002

Read more less

  Please select formation   NiCd Accus 4.0 Ah Nickel-Cadmium cells (NiCd) Fig. 1: Stick; Connection: blade terminal Fig. 2: Stick + Stick; Connection: blade terminal Fig. 1: stick Fig. 2: stick + stick Product description High-temperature NiCd cells for use with emergency lighting units 4 year design life 1 year guarantee from delivery date Properties Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet) Good charging properties at high temperature High energy maintenance of the charged battery Certified quality manufacturer In various configurations Simple connection with blade terminal With polycarbonate fixing caps and connecting cable Electrical connection with mounted end caps possible Suitable for emergency lighting equipment as per IEC 60598-2-22  

Read more less

Tridonic Electronic Magnetic Choke 380 - 415v to run 2000w Metal Halide lamps - OGLI 2000W 160

Read more less